Drivers Phonic Sound Cards & Media Devices

1. E2eSoft VSC is a Sound Card Emulator, which emulates a sound card in your system and works like a real one. You can use it to record, modify or broadcast all the sound in your system. You can also use it to create numbers of Virtual Sound Card instances to fulfill your special requirements.
2. Note: Depending on the audio device you are trying to connect, you may need install an audio driver for the device along with the Legacy Firewire driver. NOTE: If the Audio device doesn't show up under Sound, Video and Game controller or under Other Devices, then check the following things: 1.

1. Drivers Phonic Sound Cards & Media Devices Download
2. Drivers Phonic Sound Cards & Media Devices Online
3. Drivers Phonic Sound Cards & Media Devices -

1,496 drivers total Last updated: Jan 8th 2021, 16:10 GMT RSS Feed

Since its inception in 1972, Phonic has become a leading manufacturer of professional audio products—permanently perched on the cutting edge of both analog and digital technology. By the early ’80s, Phonic was the number-one producer of DJ mixers, supplying over 85% of the total units sold worldwide. Download Audio Drivers – Automatic Audio Driver Updates It is recommended you update your Audio Drivers regularly in order to avoid conflicts. Driver updates will resolve any driver conflict issues with all devices and improve the performance of your PC. Universal Audio UAD-2 Driver 5.6.0 Free Universal Audio UAD-2 DSP card and Powered Plug-Ins driver Updated: December 5 th 2017 183,000 total downloads 18 last week.

sort by:

Drivers Phonic Sound Cards & Media Devices Download

When you set inputs and outputs for recording and playback in Adobe Audition 3, you have a choice of sound card drivers: an ASIO (Audio Stream In/Out) driver, or the Audition 3.0 Windows Sound driver.

This document describes how to select a driver and how to configure each kind of driver.

Audition 3.0 Windows Sound is the default driver, but Adobe recommends that you select an ASIO driver.

ASIO is a multichannel protocol that allows compatible software to use the multichannel capabilities of ASIO-compliant sound cards.

The benefits of ASIO include:

• Lower signal latency.
• More efficient audio processing.
• Higher data throughput.
• More accurate channel synchronization.
• Better extensibility of audio hardware.
• Greater flexibility of sample rates, sample formats, and input/output channel mapping for playback and recording.
• The ability to record from two or more inputs simultaneously.
  

If you are using an ASIO-compliant audio device, then you should download and install an ASIO driver that is specifically designed for that device.

If the device manufacturer does not provide an ASIO driver, then you can install a third-party ASIO driver, such as ASIO4ALL; however, a third-party driver may not support all of the device's features.

If you are not able to obtain an ASIO driver, or if you are not using ASIO-compliant audio devices, then use the Audition 3.0 Windows Sound driver.

Audition 3.0 Windows Sound is an emulated driver which uses the system DirectSound driver.

Audition 3.0 Windows Sound provides no additional device functionality beyond what the DirectSound driver offers. For example, the DirectSound driver may be limited to stereo input and output.

Click the Edit View, Multitrack View, or Surround Encoder tab.
Note: The Edit View, Multitrack View, and Surround Encoder each have their own driver settings. You must configure driver settings for each view individually.


In the Audio Driver pop-up menu, choose a driver for the sound card you wish to use.


Choose an ASIO driver if one is listed; otherwise, choose Audition 3.0 Windows Sound.

If you chose an ASIO driver in Step 3, then go to Configuring an ASIO driver.

If you chose Audition 3.0 Windows Sound in Step 3, then go to Configuring the Audition 3.0 Windows Sound driver.

The window that appears after you click Control Panel displays the proprietary settings of the ASIO driver that you selected. These setting vary from driver to driver.

Drivers Phonic Sound Cards & Media Devices Online

For details about these settings, see your sound card's documentation, contact the cardâs manufacturer, or contact the publisher of the driver. Download avid 1394 driver.

Drivers Phonic Sound Cards & Media Devices -

You will configure the Audition 3.0 Windows Sound driver in the DirectSound Full Duplex Setup window. The options in this window are as follows:

• Device Name

  The Device Name column lists all available DirectSound outputs and inputs. To activate or deactivate a port, click the box next to the port. If the option box contains an 'X', then the port is activated.

• Buffer Size [Samples]

  The Buffer Size [Samples] column displays the number of samples that will be included in the buffer. The audio buffer is used when audio data is transferred between Audition and the sound card. The default Buffer Size is 2048 samples.

  A large buffer ensures that playback occurs without audio dropout or other glitches. However, increasing the buffer size increases the audio data latency which may cause delay between the moment Audition begins sending audio data and the moment it actually reaches the physical output. In general, lowering the buffer size improves playback while increasing it will improve recording, but the goal of setting the buffer should be to find a balance between the two.

  To change the Buffer Size [Samples] value, double-click the field and enter a different number of samples.

  Note the following Buffer Size guidelines:

  • To improve recording performance, lower the buffer size (optimal range is 32 to 256 samples).
  • To improve playback performance, increase the buffer size (optimal range is 512 to 2048 samples).
• Offset [Samples]

  The Offset [Samples] value affects latency of the input or output signal between multiple sound cards.

  To change the Offset [Samples] value, double-click the field and enter a different number of samples.

• Audio Channels, Bits per Sample

  The Audio Channels and Bits per Sample columns provide information about your sound card. The values in these columns cannot be adjusted using the DirectSound Full Duplex Setup. See the documentation for your sound card for more information on how to change these settings.

• Sync Reference

  The Sync Reference setting specifies which sound card clock is used as a reference when you activate multiple sound cards. The sound card in the topmost position is used as the Sync Reference. The DirectSound Output option is selected as the default Sync Reference.

  Note: Use Sync Reference to synchronize two or more digital audio devices for sample-accurate recording.

• Port Order

  The Port Order section allows you to click Move Up or Move Down to move the selected sound device up or down in the input/output port order. The active port (indicated by an 'X' next to the device name) should be first in the list of the available ports.

• Card Options

  The Card Options section displays these two options:

  • Full Duplex: Allows recording (input) and playback (output) to occur simultaneously. If the selected sound card supports Full Duplex, the option should appear as activated.
  • Start Input First: Specifies that the input port is initiated first for any audio hardware procedure. If the sound card doesn't seem to work correctly with Full Duplex activated (for example, you cannot play back and record at the same time), try activating this option before deactivating Full Duplex.